Autoplay
Autocomplete
Previous Lesson
Complete and Continue
Level-1 Revit Architecture for Architects
Module-1
Revit 2020 Software (12:23)
Intro to each other (5:52)
1.Introdution to Revit (8:00)
သင်ခန်းစာဖိုင်များ
2.Basic Terminology and Overview of Revit (4:28)
3.Display and Hide Ribbon Tabs (5:41)
4.Contextual Ribbon Tabs (8:46)
5.ViewControls (14:04)
6.Work with revit family (16:18)
7.In-place families (11:18)
Module-2
Lesson Plan
သင်ခန်းစာဖိုင်များ
Standard နဲ့ Building Code များ
Drawing Units
Scale and Dimensions
1.Intro to Standard (10:20)
2.Select a template (4:02)
3.Set Project Units (5:01)
4.Create a dimension style (4:50)
5.Create a new sheet (11:56)
6.Create Title Block (21:05)
7.Insert a title block (4:53)
8.Create a template (6:55)
Module-3
Chapter 1 Exercises - Imperial
1.Introducing the Autodesk Revit Architecture Interface (6:13)
2.Understanding the User Interface (6:18)
3.Use the Properties Palette to See Dynamic Updates of Properties (11:07)
4.Explore the Content of Your Project with the Project Browser (7:13)
5.Use the View Control Bar to See Frequently Used View Properties (12:54)
6.Navigate with the ViewCube (10:10)
7.Create a floor (5:14)
8.Creat walls (2:55)
9.Create Levels (10:05)
10.Change Wall Type (5:15)
11.Place Interior Walls (4:48)
12.Place Doors and Windows (7:45)
13.Space Elements Equally (7:18)
Module-4
Chapter 2 Exercises - Imperial
Fundamental types of walls
1.Chapter Outlines (3:41)
2.Understanding Wall Types and Parameters (1:12)
3.Basic Walls (6:42)
4.Stacked Walls (9:27)
5.Curtain Walls (3:30)
6.Hosting Elements in Walls (4:20)
7.Exercise 2.1_Create Wall Configurations (12:33)
8.Exercise 2.2_Host a Door in a Wall (4:02)
9.Exercise 2.3_Modify Wall Parameters (7:37)
10.Exercise 2.4_Edit and Reset the Wall Profile (10:23)
11.Exercise 2.5_Attach and Detach the Top, Base (8:47)
12.Exercise 2.6_CutOpenings in a Curved Wall (3:10)
13.Splitting and Swapping Walls (3:06)
14.Exercise 2.7_Create and Customize a curtain wall (5:19)
15.Curved Curtain Walls (4:50)
16.Exercise 2.8_Modify Curtain Wall Type (7:56)
17.Editing Wall Profiles and Embeding Curtain Walls (4:43)
18.Exercise 2.9_Embed and Edit Curtain Wall Profile (4:08)
19.Exercise 2.10_Add and Remove Curtain Grids and Mullions (5:28)
20.Exercise 2.11_Customize Curtain Panels (5:10)
Module-5
Chapter 3 Exercises - Imperial
1.Introduction (4:05)
2.Exercise 3.1Create a floor by Sketch and Pick Walls (8:05)
3.Exercise 3.2 Edit the floor boundry (3:58)
4.Exercise 3.3 Create Sloped Floors (10:47)
5.Exercise 3.4 Create an opening with the opening by face tool (5:27)
6.Exercise 3.5 Create an Opening with the Shaft Opening Tool (5:34)
7.Exercise 3.6 Create a roof by Footprintmp4 (17:01)
8.Exercise 3.7 Create a roof by Extrusion (5:31)
9.Exercise 3.8 Create Slope Arrows (7:35)
10.Exercise 3.9 Create multiple roof slopes (10:33)
11.Exercise 3.10 Add Automatic and Sketch Ceilings (8:27)
12.Exercise 3.11 Create a bulkhead (6:07)
13.Exercise 3.12 Add Lights and Rotate the Grid (7:06)
14.Exercise 3.13 Slope the Ceiling (3:45)
Module-6
Chapter 4 Exercises - Imperial
1.Introduction to Chapter-4 (2:49)
2.Ex4.1 Create a generic railing (13:38)
3.Create Stair Configurations (5:06)
4.Ex4.2 Create a stair by component (8:20)
5.Create a stair by sketch (6:15)
6.Ex4.3 Create a stair by sketch (4:19)
7.Ex4.4 Customize and Create a Component Stair Landing (6:24)
8.Ex4.5 Create a Multistory Stair (10:16)
9.Ex4.6 Modify level and stair height (10:06)
10.Ex4.7 Host a railing to a stair (5:00)
11.Ex4.8 Edit railing top rail and slope (5:48)
12.Designing ramps (15:56)
Survey
Module-7
Chapter 5 Exercises - Imperial
Chapter-5_What is a family (15:49)
Ex5.1 Exploring the model hierarchy (21:21)
Ex5.1.1 Working with System Families (10:42)
Ex5.2 Loading system families and transfer project standards (6:22)
Ex5.3 Place System Families (3:58)
Ex5.4 Create a new family and load it into a project (5:48)
Ex5.5 Save out and Reload Families from Project (5:43)
Ex5.6 Working with Hosted Families (5:49)
Ex5.7 Place Face Based Families (2:30)
Ex5.8 Shared Nested Families (4:12)
Ex5.9 Modify an In-place family (1:48)
Next Step to Level-2 Revit Architecture Course
သင်တန်းအချက်အလက်များ
7.Exercise 2.1_Create Wall Configurations
Lesson content locked
If you're already enrolled,
you'll need to login
.
Enroll in Course to Unlock